欧美牲交a欧美牲交aⅴ

<s id="r73xl"></s>

<rp id="r73xl"><acronym id="r73xl"></acronym></rp>

  • 
    

    1. <dd id="r73xl"><center id="r73xl"></center></dd>
    2. <button id="r73xl"></button>
    3. MG Series Blow Moulding Machines,Stretch Blow Molding Machines

      Your Position: Home > Products> > Stretch Blow Molding Machines> MG Series Blow Moulding Machines
       
      5 gallon PET blow moulding machine (MG-120)
      Blow Molding Machine Video Clip

      Brief Introduction
      MG-120 5 gallon PET blow moulding machine is used to produce 5gallon PET bottle that is now demanded extremely in the market. Facing great demand for 5 gallon PET bottle at market, MG-120 will certainly become the right machine for your investment. The whole procedure is automatic. It is controlled with microcomputer. In order to achieve the purpose of automatic transporting bottles, the user should connect the conveyor belt with the blow molding machine. By transmission device, the machine can be connected to the filling machine directly and start inline filling.
      Overview
      * Control system
      The control system is the heart of MG-120 PET blow moulding machine. Together with Hi-tech Man-Machine Interaction (MMI) control panel with user-friendly, the whole control system presents super performance with precise control, convenient parameter setup, obvious display and reasonable memory.

      * Pneumatic system
      Pneumatic system provides the power for MG-120's movement. World famous high quality pneumatic components equipped on MG-120 such as Festo from Germany, specially designed high-pressure valve, high precise action, long service life and reliable performance are their highlights. Network of those pneumatic components suppliers' global service ensures customers their prompt after-sale service locally for their pneumatic products used on MG-120.
      * Sensor system
      MG-120 5 gallon PET moulding machine adopts high quality imported sensor & switch system including proximity switch, photoelectric switch, and electronic magnet switch to keep production process going step by step and avoid any possible damage on machine.

      * Heating system
      MG-120 automatic PET blow moulding machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving. Number of infrared heating lamps placed onto three heating zone with 9 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform of different sizes. Each lamp's horizontal position is adjustable to keep the machine agile.

      * Clamping system
      MG-120 adopts three-plate type toggle clamping unit. Apart from the three-plate type toggle clamping unit, there is a high pressure assistant clamping device that is special designed to get a firm clamping.

      * Preform feeding & bottle discharging system
      MG-120 automatic stretch blow molding machine is equipped with patented prefrom loading system, which protect the neck of the perform from possible damage and allow to make a slight change of preform dimension without changing prefrom holder. The heated preforms are blown with neck up in order to ensure the quality of the finished bottle, and then shaped bottles will automatic fall down during the machine' movement.
      Features
      1. Patented Feeding system carries the preform automatically.
      2. Suit to produce 5-25L wide mouth PET container
      3. Advanced PLC control system with a use-friendly control panel
      4. Reliable sensor system monitor machine's auto running
      5. Powerful heating unit with precision control and convenient adjusting device
      6. Cooling system to get perfect cooling result
      7. Compact structure to save space
      8. Prevent bottle from possible pollution by worker
      9. Equipped with special designed air storage units
      10. Simple installation & startup adjustment
      11. Waste rate of finished bottle is less than 0.3%.
      Container/Bottle Samples
      Finished PET bottle samples produced by MG-120 as follow:
      Edible Oil Bottle20L JarFive gallon water bucket
       
      Two gallon water bucket with handleThree gallon water bucket 
      Specification
      General InformationMG-120
      Clamping Force34T
      Clamping Stroke330mm
      Max.Stretching Stroke550mm
      Bottom Moving Stroke70mm
      Theoretical Output120 BPH
      Max.Mould Thickness400mm
      Space Between Tie Bars520*600mm

      Electrical System
      Voltage Standard380v/3PH/50Hz
      Number of Heating Zone2 Sections
      Total Power(Full Loaded)15KW

      Container
      Max.Container Volume25L
      Neck Diameter Range65mm
      Max.Container Diameter400mm
      Max.Container Height550mm

      Auxiliary System
      Low Air Compressor8-10 BAr
      High Air Compressor30 Bar
      Air Dryer2.0/30

      Dimension & Weight (L*W*H)
      Blow Molding Machine260*190*195cm
      Pre-heater 
      Net Weight5.2 Ton
      Mega Machinery, the Professional 5 Gallon Blow Moulding Machine supplier in China.

      Note:5 Gallon blow molding machine is also known as Blow Moulding Machine for the large PET bottles, Reheat stretch blow molding machines, Stretch blow molding machines, bottle blowing machine, blowing machines and PET blow molding machine.
      Copyright © 2012 China Taizhou Huangyan MEGA Machinery Mould Co., Ltd. All Rights Reserved.
      Language Tools: Chinese | Portuguese | English | Japanese | German | Arabic | Spanish | Russian | French
      欧美牲交a欧美牲交aⅴ

      <s id="r73xl"></s>

      <rp id="r73xl"><acronym id="r73xl"></acronym></rp>

    4. 
      

      1. <dd id="r73xl"><center id="r73xl"></center></dd>
      2. <button id="r73xl"></button>