欧美牲交a欧美牲交aⅴ

<s id="r73xl"></s>

<rp id="r73xl"><acronym id="r73xl"></acronym></rp>

  • 
    

    1. <dd id="r73xl"><center id="r73xl"></center></dd>
    2. <button id="r73xl"></button>
    3. SS Series Blow Moulding Machines,Stretch Blow Molding Machines

      Your Position: Home > Products> > Stretch Blow Molding Machines> SS Series Blow Moulding Machines
      MG-SS Series Automatic Blow Molding machines
      MG_ss2500
      Blow Molding Machine Video Clip(SS2600)
      Blow Molding Machine Video Clip(SS4500)

      Brief Introduction
      Mega Machinerys' SS Series automatic linear PET blow moulding machines was designed with two principles in mind. One, to lower the running cost for the bottle producer and two, provide easy operation. The MG-SS Series PET blow moulding machines lowers your production costs so you can achieve maximum profits in your competitive bottling market, the MG-SS series blower reduces your energy expenses by up to 30% at a maximum output of 1500BPH for the signal cavity machine. Thanks to our GM Mr. Cai Yunsen who developed the patented process for spacing the performs which maximizes the performance of the MG-SS series PET blow moulding machine.
      Overview
      * PLC controller
      MG-SS series PET blow moulding machines adopts the famous Delta controller system. It integrates a self-diagnosis program, all warning information is shown through the friendly touch interface featuring an alarm system. Also, the controller shows the actual blowing speed during production.
      * Cast molded platen with toggle clamping unit
      Cast molded platens offer the longest service life, and enhance the stability of the machine. Engineering software analyzed and optimized the clamping system to guaranty the fastest possible moving speed and strongest clamping force. Also an additional high pressure compensation system is standard equipment and ensures the perfect clamping result.
      * Infrared heating system
      A Zoned and layered heating system with an advanced venting unit keeps the temperature accurate and uniform, this is the key to manufacturing high quality plastic bottles. The lamps can also be adjusted horizontally and vertically inside the specially designed heating oven. This ensures the distribution of heat meets the different shapes of the preforms.
      * Stretching system
      A double cylinder stretching unit is standard equipment and ensures the fastest possible stretching speed, and the longest possible stretching stroke. Linear motion guides provide ultra smooth movement and the lowest possible friction coefficient.
      * Patented perform spacing system
      The patented perform spacing system sets the preform adapters 120mm apart at the blowing station by mechanical function and also improves the moving speed.

      * Preform loading & bottle discharging system
      Famous brand pneumatic parts guarantee the machines reliable performance and long service life while Linear motion guides improve the moving speed. Special grip units are designed to be changed easily.
      Features
      1. Full automatic running with theoretical output capacity up to 4500 bottles per hour for 0.1L volume using four-cavity blow mold
      2. Patented loading system carries the preform automatically with less moving parts.
      3. Suitable to produce 0.1 ~ 2.5L Standard neck PET container
      4. Advanced PLC control system with a use-friendly control panel
      5. Built-in memory of the PLC saves all the sets of numbers required to produce different size bottles.
      6. Multiple Reliable sensor systems monitors the machine's automatic function
      7. Equipped with special designed air storage unit
      8. Powerful heating unit with precision controller and convenient adjusting mechanism.
      9. Cooling system that provides a perfect cooling result
      10. Compact design that saves space
      11. Simple installation & startup operation
      12. minimal transfer space for the air distribution system.
      Bottle Samples
      PET bottles produced by SS series automatic reheat  PET stretch blow molding machine:
      CSD 3LDetergen 500ml PET bottleEdible oil 4500ML
      PET Jar-5Lpharmacal 50mlwater bottle 1L
      Specification
      General InformationMG-SS1500MG-SS2500/2600MG-SS3500MG-SS4500MG-SS7000MG-SS 2LMG-SS 2EL
      Clamping Force14T25T31T34T63T50T55T
      Clamping Stroke150MM150MM150MM150MM150MM200MM250MM
      Max. Stretching Stroke370MM370MM370MM370MM380MM500MM550MM
      Bottom Moving Stroke70MM70MM70MM70MM70MM70MM70MM
      Number of Cavities1 Cavity2 Cavity3 Cavity4 Cavity6 Cavity2 Cavity2Cavity
      Theoretical Output160 BPH2500BPH3500BPH4500BPH7000BPH1800BPH1200BPH
      Max. Mould Thickness300MM300MM300MM300MM300MM290MM322MM
      Space Between
      Tie Bars
      300X380MM400X380MM500X380MM640X380MM800X400MM----

      Electrical System
      Voltage Standard380v/3PH/50Hz or special order
      Number of Heating Zone2 Sections2 Sections3 Sections4 Sections6 Sections5 Sections7 Sections
      Total Power (MAX Loaded)20KW28KW28KW60KW216KW100KW140KW

      Container
      Max. Container Volume2.5L2.5L2.5L2.5L2.5L6L10L
      Neck Diameter Range32MM32MM32MM32MM15-40MM50MM50MM
      Max. Container Diameter35-110MM35-110MM35-110MM35-110MM35-110MM190MM220MM
      Max. Container Height400MM400MM400MM400MM400MM350MM400MM

      Auxiliary System
      Low Air compressor8-10 Bar8-10 Bar8-10 Bar8-10 Bar8-10 Bar10Bar/2.010Bar/2.0
      High Air compressor30 Bar30 Bar30 Bar30 Bar30 Bar40Barx3.040Barx3.0
      Air Dryer2.0/303.0/303.0/303.0/306.0/30----

      Dimension & Weight
      Blow molding machine180x160x200CM200x180x220CM215x230x220CM215x250x230CM227x400x190CM290x222x230CM160X220X190cm
      Preform Autoloader140x105x200CM150x120x250CM150x120x250CM150x120x250CM220x150x250CM250x160x280CM250X160X280cm
      Net Weight2.6ton3.8ton4.5ton6 ton7 ton4.5T6T
      ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
      General InformationMG-SS 4 SFMG-SS 4BFMG-SS 4LMG-SS 4ELMG-SS 6 SFMG-SS 6BFMG-SS 8SFMG-SS 10SF
      Clamping Force35T37T75T80T40T45T45T60T
      Clamping Stroke80MM130MM200MM250MM80MM120MM80MM80MM
      Max. Stretching Stroke250MM350MM500MM550MM250MM300MM250MM250MM
      Bottom Moving Stroke70MM70MM70MM70MM70MM70MM70MM70MM
      Number of Cavities4 Cavity4 Cavity4 Cavity4 Cavity6 Cavity6 Cavity8Cavity10Cavity
      Theoretical Output4500BPH4000BPH3000BPH2200BPH9000BPH5800BPH1000BPH12000BPH
      Max. Mould Thickness300MM300MM290MM322MM200MM300MM200MM200MM
      Space Between
      Tie Bars
      ----------------

      Electrical System
      Voltage Standard380v/3PH/50Hz or special order
      Number of Heating Zone4 Sections6 Sections5 Sections7 Sections6 Sections6 Sections6 Sections6 Sections
      Total Power (MAX Loaded)48KW96KW90KW130KW120KW120KW120KW150KW

      Container
      Max. Container Volume600mL1.5L6L10L0.75L1.5L0.75L0.75L
      Neck Diameter Range30MM32MM50MM50MM32MM32MM32MM32MM
      Max. Container Diameter65MM100MM200MM220MM70MM100MM70MM70MM
      Max. Container Height220MM360MM350MM400MM260MM360MM330MM260MM


      Auxiliary System
      Low Air compressor10Bar/1.610Bar/1.610Bar/2.010Bar/2.010Bar/2.010Bar/2.010Bar/2.010Bar/2.0
      High Air compressor40Barx3.040Barx3.040Bar/3.040Bar/5.040Bar/5.040Bar/5.040Bar/6.040Bar/6.0
      Air Dryer----------------

      Dimension & Weight
      Blow molding machine300x190x230CM510x237x210CM500x220x230CM500x220x230CM490x220x230CM700x221x210CM540x210x210cm700x210x210cm
      Preform Autoloader250x160x270CM250x160x270CM250x180x280CM250x180x280CM250x180x270CM250x180x270CM250x180x270cm250x180x270cm
      Net Weight4ton4.5ton9ton10ton8ton9T9T10T
      Mega Machinery, the Professional PET Blow Moulding Machine supplier in China.

      Note: PET stretch blow molding machine is also known as Reheat stretch blow molding machines, Stretch blow molding machines, bottle blowing machine, blowing machines and PET blow molding machine.

      Copyright © 2012 China Taizhou Huangyan MEGA Machinery Mould Co., Ltd. All Rights Reserved.
      Language Tools: Chinese | Portuguese | English | Japanese | German | Arabic | Spanish | Russian | French
      欧美牲交a欧美牲交aⅴ

      <s id="r73xl"></s>

      <rp id="r73xl"><acronym id="r73xl"></acronym></rp>

    4. 
      

      1. <dd id="r73xl"><center id="r73xl"></center></dd>
      2. <button id="r73xl"></button>